Shop By Category

Stone feel PLA based filament StoneFil 2.85mm Terracotta 500 gram 3D Printer Filament

$87 Was: $146

Out of stock

Ask A Question


    StoneFil is a PLA-based filament which is based on our modified and easy-to-print EasyFil PLA compound and is gravimetrically filled with 50% of powdered stone.

    This high “stone filling” has resulted in a 3D printer filament with remarkable aesthetic features and a significant higher material density up to 37% higher than “normal” PLA. StoneFil is an easy-to-print 3D printer filament and printed objects have an extremely matte stone-like finish with unique natural gradient colour linings resulting in an exceptional chromatic spectrum per print. Every StoneFil printed object will have its own identity and unique gradient colour shading.


    Unique features

    • Easy-to-print
    • 50% gravimetric powdered stone filling
      • o   ±37% heavier than “normal” PLA
    • Matte and rough stone-like finish
    • Unique natural/organic gradient colour linings
      • o   Every print has its unique natural stone gradient colour shading


    General printing guidelines *


    Nozzle size: ≥ 0.4mm

    Layer height: ≥ 0.12mm

    Flow rate: ± 110%

    Print temp: ± 200 – 240° C

    Print speed: High / Medium

    Retraction: Yes – 5mm

    Heat bed: ± 0 – 60° C

    Fan speed: 50-100%

    Experience level: Beginner


    *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers

    Shipping & Returns

    Delivery Time: 3 to 10 days.

    Order Handling Time: 1 to 2 days.

    Returns: Return needs to be initiated within 30 days.